![]() ![]() If not all emulsion is removed, a second reclaiming cycle should be used to completely remove the emulsion. It can also be used in combination with KIWO water based screen cleaners, e.g. This can lead to a hardening of the emulsion and the resulting emulsion residues will be extremely difficult to remove.įor automatic equipment a dwell time of 60 -120 seconds after applying the decoating solution is sufficient. Kiwo Stencil Remover 1:20/1:50 1.2.Relevant identified uses of the substance or mixture and uses advised against Relevant identified uses Stencil production for screen and textile printing Reserved for industrial and professional use. Rather, rinse the screen and reapply fresh decoating solution.Įnsure that the diluted KIWOCLEAN STENCIL REMOVER CONCENTRATE - WB solution does not dry on the screen. Prolonged reaction time may result in reverse effects and does not help in the decoating process. ![]() A high pressure water spray (1000 - 2000 psi, 40 - 60 bar) may be required for highly water resistant emulsions. Rub the screen gently with a brush to dissolve the emulsion.Īfter approximately 2 minutes, rinse thoroughly with a strong water spray. One quart of product makes up to 5 gallons of working solution. It is formulated both for manual or automatic reclaiming, and does not contain any chlorine nor heavy metals. KIWOCLEAN STENCIL REMOVER CONCENTRATE - WB mixture ratios can be modified for best results depending on the type and thickness of emulsion coating and desired results.Īpply the diluted solution with a soft, clean brush evenly on both sides of the screen after the screen has been carefully cleaned of ink residue. The Kiwo Degreaser 1:20 Concentrate stencil remover is a very economical liquid concentrated stencil remover for all direct emulsions and capillary films. ![]()
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |